Описание

Technical data — electrical ratings
Voltage supply 4.75&hellip,30 VDC
Reverse polarity protection Yes
Short-circuit proof Yes
Consumption w/o load 70 mA
Initializing time 30 ms after power on
Pulses per revolution 1&hellip,65536
Scan ratio 45&hellip,55 % typical at 2048 ppr
Reference signal Zero pulse 90° or 180°
Sensing method Optical
Output frequency 300 kHz (TTL) 160 kHz (HTL)
Output signals A+, B+, R+, A-, B-, R-
Output stages TTL/RS422 HTL/push-pull
Programmable parameters Output level TTL/HTL Pulse number 1&hellip,65536 Zero pulse width 90°/180° Zero pulse position Signal sequence
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-3
Approval UL 508 / CSA 22.2
Technical data — mechanical design
Size (flange) 58 mm
Shaft type 8&hellip,15 mm (blind hollow shaft)
Motor shaft tolerance 0.2 mm axial 0.03 mm radial
Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal)
Operating speed 6000 rpm (+20 °C, IP 67) 8000 rpm (+20 °C, IP 65)
Starting torque 0.02 Nm (+20 °C, IP 65) 0.025 Nm (+20 °C, IP 67)
Materials Housing: aluminium die-cast Flange: aluminium
Operating temperature -40&hellip,+100 °C
Relative humidity 90 % non-condensing
Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms
Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable
Weight approx. 300 g
''